#!/bin/rc
echo -n terminal > /env/service
echo -n plan9 > /env/site
echo -n astro > /env/facedom
echo -n emelie > /env/fs

bind -a '#y' /dev
bind -a '#F' /dev
bind -a '#I' /net
bind -a '#D' /net

# parallelism for mk
NPROC=1

sysname=`{cat /dev/sysname}
prompt=($sysname^'# ' '	')

# flavor
fileserver=emelie
cpu=olive

# flash partitions
echo -n add bootldr 0 0x40000 > /dev/flash/flashctl
echo -n add kernel 0x40000 0xc0000 > /dev/flash/flashctl
echo -n add ramdisk 0x100000 0x800000 > /dev/flash/flashctl
echo -n add params 0x800000 0x840000 > /dev/flash/flashctl

# so we can see things
light 0

# set variables
ramfs
params -f
if(! grep -s '^calibrate=' /tmp/tmpparams)
	pencal >>/tmp/tmpparams
if not {
	eval `{grep '^calibrate=' /tmp/tmpparams}
	echo calibrate $calibrate > '#m/mousectl'
}
prompter /tmp/tmpparams
params
. /tmp/tmpparams


# set userid
echo -n $user > /dev/hostowner
if(test -e /env/password){
	auth/iam $user $password
	rm /env/password
}

# start network
if(grep -s WaveLAN/IEEE /dev/pcm0ctl){
	echo -n 'configure #l0 wavelan'>/dev/pcm0ctl
	bind -a '#l0' /net
	switch($wvkey1){
	case ''
		;
	case *
		echo -n 'key1 '^$wvkey1 >/net/ether0/clone
	}
	switch($wvkey2){
	case ''
		;
	case *
		echo -n 'key2 '^$wvkey2 >/net/ether0/clone
	}
	switch($wvkey3){
	case ''
		;
	case *
		echo -n 'key3 '^$wvkey3 >/net/ether0/clone
	}
	switch($wvessid){
	case ''
		;
	case *
		echo -n 'essid '^$wvessid >/net/ether0/clone
	}
	switch($wvtxkey){
	case ''
		;
	case *
		echo -n 'txkey '^$wvtxkey >/net/ether0/clone
	}
	ip/ipconfig ether /net/ether0
	ndb/cs
	ndb/dns -r
}

if(! test -e /env/font)
	font=/lib/font/bit/lucidasans/unicode.6.font
if(! test -e /env/tabstop)
	tabstop=2
exec rio -sk '/bin/keyboard'
